Complementary treatments 500g

Product characteristics:

• Immediate solution to restore your pool water.
• Perfect for pool start-up
• 500 g granulated format
• Product reference: 76122

Instructions for use:

• Initial treatment: add 15-20 g of product per m3 of water. After 2 hours, adjust the pH of the water to between 7.2-7.6 using Solid pH Reducer or Solid pH Increaser.
• Maintenance treatment: with the pH of the water adjusted, add 1 to 3 g of product per m³ of water daily.
• These doses are for guidance only and can be modified depending on the characteristics of each pool, climate, etc.
• The initial treatment should be repeated whenever there is a lack of transparency in the water.
• Introduce the necessary dose of product into a skimmer, then start up the filtration equipment, so that the product can be dissolved as the water circulates through the skimmer.
• The addition of the product shall be done preferably at dusk and without the presence of bathers in the pool water.
• The free residual chlorine should be between 0.5-2 mg/l, a value that can be easily measured using a chlorine and pH analyser kit.
• Prolonged contact of this product on pool surfaces should be avoided in polyester, liner, vinyl or painted pools. This product discolours them.